Pytchley

Pytchley

From £723.99 £648.99 (Spring Sale 10% off Shell Price)

Specifications:

  • Offset apex roof shed
  • Tongue & groove shiplap, including floor and roof
  • Fully framed and braced door with three hinges
  • Glass windows
  • 300mm roof overhang
  • Door on left and windows on right as standard
  • Please note: in order to fit under roof overhang, door height is lower than standard

Options available

  • Toughened glass or perspex windows
  • No windows
  • Door hinged on the right (on left as standard)
  • Door on the right and windows on the left (with door hinged on the right)
  • Shedsheet rubber roof covering
Cladding size or Overlap
CLADDING:
12mm
Building frame size
FRAMING:
45x34mm
EAVES HT
EAVES HT
1.68m - 1.9m
Lock & Key
LOCK:
Lock & Key
Size CodeSize L x W x HWindowsDoor W x HFloor PlanBuild Guide
6041.8 x 1.2 x 2.2m1790 x 1625mm View PDFView PDF
7052.1 x 1.5 x 2.25m1790 x 1625mm View PDFView PDF
8062.4 x 1.8 x 2.3m2790 x 1625mm View PDFView PDF
10063.0 x 1.8 x 2.3m2790 x 1625mm View PDFView PDF
10083.0 x 2.4 x 2.4m2790 x 1625mm View PDFView PDF


Product Information

Size Code: Approximate size in feet, for example 806 = approximately 8ft x 6ft.

Size FW x D x H: The Front Width (where the door is positioned) x Depth (front to back) x Height (to the top of the apex) in metres. Non-standard sizes are available.

Windows: Quantity of windows.

Door W x H: Width x Height of the door in millimetres. Please note the door gap is slightly smaller than the door itself.

Floor Plan: Select by size from the table above. These show the size of the floor along with the joins (if any) and direction of the floor joists. Please note the direction of the floor joists can change so must be checked before ordering if critical.

Assembly Guides: Select by size from the table above. Please note that due to the number of sizes, models and variations offered, the assembly guide may not be 100% specific to your building, but should provide you with all the necessary principles.

Eaves Height: Internal height at the lowest point of the roof (at the sides).

Lock: This building comes as standard with a press lock and two keys.

Roof cover: Supplied with high quality polyester-based roofing felt.

Building Sizes All sizes are approximate, based on external measurements (unless stated otherwise) – they do not include roof overhang. Please allow for any overhangs when choosing the size of your building, bearing in mind space required for installation and maintenance. We advise you check internal sizes if buying a building for a specific purpose, or any other sizes if critical. Planning permission can be required on some buildings depending on size and location, please check with your local council if unsure.

Cladding & Framing

Cladding and framing make up the panels from which this building is constructed. In general, the thicker the cladding and framing, the stronger the shed will be and the longer it will last. All the panels on this building are made from sustainably sourced 12mm thick cladding and 45mm x 34mm thick framing. Please note this is the finished size after machining (some companies quote the size before machining).