Norfolk Combi

Norfolk Combi

Norfolk Combi

From £1099.00  £1020.00 (Spring Sale 10% off Shell Price)

Specifications:

  • New model
  • Apex roof shed with partition
  • Tongue & groove shiplap, including floor and roof
  • 1.2m wide double door on end to access approx. 1.8m x 1.3m section on 806, or 1.8 x 1.9m section on 1006
  • 0.79m wide single door on left-hand side to access approx. 1.8m x 1.0m section
  • No windows
  • Available in two sizes

Options available

  • Side door on right-hand side instead of left-hand side (specify on order)
  • Four space semi-vertical bike rack (fits into double door section)
  • Shedsheet rubber roof covering
Cladding size or Overlap
CLADDING:
12mm
Building frame size
FRAMING:
45x34mm
EAVES HT
EAVES HT
1.8m
Pad Bolts
LOCK:
Pad Bolts
Size CodeSize L x W x HWindowsDoor W x HFloor PlanBuild Guide
8062.4 x 1.8 x 2.25m-- View PDF-
10063.0 x 1.8 x 2.25m-- View PDF-


Product Information

Size Code: Approximate size in feet, for example 806 = approximately 8ft x 6ft.

Size L x W x H: The Length x Width (the double door end) x Height (to the top of the apex) in metres.

Door: Please note the door gap is slightly smaller than the door itself.

Floor Plan: Select by size from the table above. These show the size of the floor along with the joins (if any) and direction of the floor joists. Please note the direction of the floor joists can change so must be checked before ordering if critical.

Eaves Height: Internal height at the lowest point of the roof (at the sides).

Lock: The doors on this building come with a pad bolt suitable for fitting a padlock if desired.

Roof cover: Supplied with high quality polyester-based roofing felt.

Building Sizes All sizes are approximate, based on external measurements (unless stated otherwise) – they do not include roof overhang. Please allow for any overhangs when choosing the size of your building, bearing in mind space required for installation and maintenance. We advise you check internal sizes if buying a building for a specific purpose, or any other sizes if critical. Planning permission can be required on some buildings depending on size and location, please check with your local council if unsure.

Cladding & Framing

Cladding and framing make up the panels from which this building is constructed. In general, the thicker the cladding and framing, the stronger the shed will be and the longer it will last. All the panels on this building are made from sustainably sourced 12mm thick cladding and 45mm x 34mm thick framing. Please note this is the finished size after machining (some companies quote the size before machining).