Major Apex

Major Apex

Specifications:

  • Extra heavy duty adaptable apex roof shed
  • Heavy duty sawn framework and roof purlins
  • Thicker than average tongue & groove shiplap, including floor and roof
  • 300mm taller than our standard shed height
  • Taller door with heavy duty galvanised hinges
  • Glass windows
  • Rim lock and handle as standard on single doors
  • Available in sizes not listed (maximum width 3.6m no maximum length)
  • Almost any feature in our range of buildings can be added to the Major Apex

Options available

  • Toughened glass or perspex windows
  • No windows
  • 1.2m double doors on 1.8m wide panels (lock replaced by pad bolt)
  • 1.5m double doors on 2.1m wide and above panels (lock replaced by pad bolt)
  • 1.8m double doors on 2.4m wide and above panels (lock replaced by pad bolt)
  • 2.1m double doors on 2.7m wide and above panels (lock replaced by pad bolt)
  • 2.4m double doors on 3.0m wide and above panels (lock replaced by pad bolt)
  • Door hinged on the right (on left as standard)
  • Wider 900mm single door
  • Extra Door
  • Stable door
  • Rockingham door
  • Cotswold doors (and change to ‘Modern’ if desired)
  • Cotswold window (and change to ‘Modern’ if desired)
  • Opening window
  • Window inserts (as Warwick Conversion)
  • Security windows (see picture)
  • Padlock protector (not all types of padlock fit)
  • Transverse ridge (width becomes the bigger dimension)
  • 150mm extra height
  • Restrict height to 2.5m
  • Roof overhang
  • Shaped fascia at front (Cotswold style)
  • No floor
  • Partition up to 3.6m
  • Shedsheet rubber roof covering
Cladding size or Overlap
CLADDING:
15mm
Building frame size
FRAMING:
60x50mm
EAVES HT
EAVES HT
1.98m
Rim Lock
LOCK:
Rim Lock
Size Code Size L x W x H Windows Door W x H Floor Plan Build Guide
604 1.8 x 1.2 x 20.6 1 790 x 1650mm - -
705 2.1 x 1.5 x 2.06 1 or 2* 790 x 1750mm - -
606 1.8 x 1.8 x 2.06m 1 or 2* 790 x 1750mm - -
806 2.4 x 1.8 x 2.06m 2 790 x 1750mm - -
1006 3.0 x 1.8 x 2.06 2 or 3* 790 x 1750mm - -
1206 3.6 x 1.8 x 2.11m 3 or 4* 790 x 1750mm - -
707 2.1 x 2.1 x 2.11m 1 or 2* 790 x 1750mm - -
808 2.4 x 2.4 x 2.11m 2 790 x 1750mm - -
1008 3.0 x 2.4 x 2.11m 2 or 3* 790 x 1750mm - -
1208 3.6 x 2.4 x 2.11m 3 or 4* 790 x 1750mm - -


Product Information

Size Code: Approximate size in feet, for example 806 = approximately 8ft x 6ft

Size L x W x H: The Length (the window side) x Width (the door end) x Height (to the top of the apex) in metres. Non-standard sizes are available.

Windows: Quantity of windows, which can depend on the position of the door. For example, on a Kent 1006 style 3, there would be three windows in the Front Width, but in a Kent 1006 style 2, there would only be room for two windows in the Front Width, as the door takes the place of one of the windows.

Door W x H: Width x Height of the door in millimetres. Please note the door gap is slightly smaller than the door itself.

Floor Plan: Select by size from the table above. These show the size of the floor along with the joins (if any) and direction of the floor joists. Please note the direction of the floor joists can change so must be checked before ordering if critical.

Assembly Guides: Select by size from the table above. Please note that due to the number of sizes, models and variations offered, the assembly guide may not be 100% specific to your building, but should provide you with all the necessary principles.

Eaves Height: Internal height at the lowest point of the roof (at the sides).

Lock: This building comes as standard with a rim lock and two keys.

Roof cover: Supplied with high quality polyester-based roofing felt.

Building Sizes All sizes are approximate, based on external measurements (unless stated otherwise) – they do not include roof overhang. Please allow for any overhangs when choosing the size of your building, bearing in mind space required for installation and maintenance. We advise you check internal sizes if buying a building for a specific purpose, or any other sizes if critical. Planning permission can be required on some buildings depending on size and location, please check with your local council if unsure.

Cladding & Framing

Cladding and framing make up the panels from which this building is constructed. In general, the thicker the cladding and framing, the stronger the shed will be and the longer it will last. All the panels on this building are made from sustainably sourced 12mm thick cladding and 45mm x 34mm thick framing. Please note this is the finished size after machining (some companies quote the size before machining).