Kent

Kent

Specifications:

  • Adaptable pent roof shed
  • Thicker than average tongue & groove shiplap, including floor and roof
  • Fully framed and braced door with three galvanised hinges
  • Glass windows
  • Available in numerous configurations

Options available

  • Toughened glass or perspex windows
  • No windows
  • Double doors (lock replaced by pad bolt)
  • Door hinged on opposite side
  • Wider 900mm single door
  • Stable door
  • Rockingham door
  • Cotswold doors
  • Cotswold window
  • Opening window
  • Window inserts (as Warwick Conversion)
  • Security windows (see Major Apex for picture)
  • Rim lock and handle (not available for double doors)
  • 150mm extra height
  • No floor
  • Shedsheet rubber roof covering
  • Choose from the ten door and window layouts below (styles 9 & 10 can only be selected on size 806 or larger)
Cladding size or Overlap
CLADDING:
15mm
Building frame size
FRAMING:
45x34mm
EAVES HT
EAVES HT
1.98m - 1.8m
Lock & Key
LOCK:
Lock & Key
Size Code Size L x W x H Windows Door W x H Floor Plan Build Guide
604 1.8 x 1.2 x 20.6 1 790 x 1650mm View PDF View PDF
705 2.1 x 1.5 x 2.06 1 or 2* 790 x 1750mm View PDF View PDF
606 1.8 x 1.8 x 2.06m 1 or 2* 790 x 1750mm View PDF View PDF
806 2.4 x 1.8 x 2.06m 2 790 x 1750mm View PDF View PDF
1006 3.0 x 1.8 x 2.06 2 or 3* 790 x 1750mm View PDF View PDF
1206 3.6 x 1.8 x 2.11m 3 or 4* 790 x 1750mm View PDF View PDF
707 2.1 x 2.1 x 2.11m 1 or 2* 790 x 1750mm View PDF View PDF
808 2.4 x 2.4 x 2.11m 2 790 x 1750mm View PDF View PDF
1008 3.0 x 2.4 x 2.11m 2 or 3* 790 x 1750mm View PDF View PDF
1208 3.6 x 2.4 x 2.11m 3 or 4* 790 x 1750mm View PDF View PDF


Product Information

Size Code: Approximate size in feet, for example 806 = approximately 8ft x 6ft

Size FW x D x H: The Front Width (normally the long side) x Depth (the sloping ends) x Height (to the top of the roof) in metres. Non-standard sizes are available.

Windows: Quantity of windows, which can depend on the position of the door. For example, on a Kent 1006 style 3, there would be three windows in the Front Width, but in a Kent 1006 style 2, there would only be room for two windows in the Front Width, as the door takes the place of one of the windows.

Door W x H: Width x Height of the door in millimetres. Please note the door gap is slightly smaller than the door itself.

Floor Plan: Select by size from the table above. These show the size of the floor along with the joins (if any) and direction of the floor joists. Please note the direction of the floor joists can change so must be checked before ordering if critical.

Assembly Guides: Select by size from the table above. Please note that due to the number of sizes, models and variations offered, the assembly guide may not be 100% specific to your building, but should provide you with all the necessary principles.

Internal: Height at the high and low sides of the roof internally.

Lock: This building comes as standard with a press lock and two keys.

Roof cover: Supplied with high quality polyester-based roofing felt.

Building Sizes All sizes are approximate, based on external measurements (unless stated otherwise) – they do not include roof overhang. Please allow for any overhangs when choosing the size of your building, bearing in mind space required for installation and maintenance. We advise you check internal sizes if buying a building for a specific purpose, or any other sizes if critical. Planning permission can be required on some buildings depending on size and location, please check with your local council if unsure.

Cladding & Framing

Cladding and framing make up the panels from which this building is constructed. In general, the thicker the cladding and framing, the stronger the shed will be and the longer it will last. All the panels on this building are made from sustainably sourced 12mm thick cladding and 45mm x 34mm thick framing. Please note this is the finished size after machining (some companies quote the size before machining).