Devon Summerhouse

Devon Summerhouse

Specification

  • Corner summerhouse
  • Thicker than average tongue & groove shiplap, including floor and roof
  • Joinery quality hardwood double door with mortice lock
  • Top window on each side is opening
  • Toughened glass as standard
  • Available in four sizes

Options Available:

  • 150mm extra height
  • Green felt tiles
  • EPDM  rubber roof covering (20 Year Warranty)
Cladding size or Overlap
CLADDING:
15mm
Building frame size
FRAMING:
45mm x 34mm
EAVES HT
EAVES HT
2.0m - 1.8m
Mortice Lock
LOCK:
Mortice Lock
Size Code Size L x W x H Windows Door W x H Floor Plan Build Guide
606 1.8 x 1.8 x 2.1m 4 1200 x 1800mm View PDF View PDF
707 2.1 x 2.1 x 2.1m 4 1200 x 1800mm View PDF View PDF
808 2.4 x 2.4 x 2.1m 4 1200 x 1800mm View PDF View PDF
909 2.7 x 2.7 x 2.1m - 1200 x 1800mm View PDF View PDF


Size Code: Approximate size in feet, for example 808 = approximately 8ft x 8ft.

Size L x W x H: The Length x Width x Height (to the top of the roof) in metres. The Length and Width refer to the two back sections, which are the longest sections. If you imagine a square with a corner cut off, the Length and Width would be the two intact sides of the square.

Door W x H: Width x Height of the door in millimetres. Please note the door gap is slightly smaller than the door itself.

Floor Plan: Select by size from the table above. These show the floor size, the joins (if any), and the direction of the floor joists. Please note the direction of the floor joists can change so must be checked before ordering if critical.

Assembly Guides: Select by size from the table above. Please note that due to the number of sizes, models and variations offered, the assembly guide may not be 100% specific to your building, but should provide you with all the necessary principles.

CLADDING & FRAMINGCladding and framing make up the panels from which this building is constructed. In general, the thicker the cladding and framing, the stronger the shed will be and the longer it will last. All the panels on this building are made from sustainably sourced 15mm thick cladding and 45mm x 34mm thick framing. Please note this is the finished size after machining (some companies quote the size before machining).

Internal: Height at the high (at the front) and low (at the back) sides of the roof internally.

Lock: This building comes as standard with a mortice lock and two keys.

Roof cover: Supplied with high-quality polyester-based roofing felt.

 

Building Sizes
All sizes are approximate, based on external measurements (unless stated otherwise) – they do not include the roof overhang. Please allow for any overhangs when choosing the size of your building, bearing in mind the space required for installation and maintenance. We advise you to check internal sizes if buying a building for a specific purpose, or any other sizes if critical. Planning permission can be required on some buildings depending on size and location, please check with your local council if unsure