Cottage

Cottage

Specifications:

  • Economical apex roof shed
  • Traditional weatherboard style overlap cladding
  • Solid close-boarded timber floor
  • Tongue & groove roof
  • Glass windows
  • Window section can be fitted on either side

Options available

  • Toughened glass or perspex windows
  • No windows
  • Door hinged on the right (on left as standard)
Cladding size or Overlap
CLADDING:
Overlap
Building frame size
FRAMING:
50x22mm
EAVES HT
EAVES HT
1.68m
Hasp & Staple
LOCK:
Hasp & Staple
Size Code Size L x W x H Windows Door W x H Floor Plan Build Guide
604 1.8 x 1.2 x 1.9m 1 660 x 1625mm View PDF View PDF
705 2.1 x 1.5 x 2.1m 2 760 x 1625mm View PDF View PDF
806 2.4 x 1.8 x 2.1m 2 760 x 1625mm View PDF View PDF
1006 3.0 x 1.8 x 2.1m 3 760 x 1625mm View PDF View PDF
1008 3.0 x 2.4 x 2.2m 3 900 x 1625mm View PDF View PDF


Product Information

Size Code: Approximate size in feet, for example 707 = approximately 7ft x 7ft.

Size L x W x H: The Length (the window side) x Width (the door end) x Height (to the top of the apex) in metres.

Windows: Quantity of windows on one of the sides, the other side is fully boarded. The window side and the plain side are interchangeable so the windows can be positioned on either side when assembling.

Door W x H: Width x Height of the door in millimetres. Please note the door gap is slightly smaller than the door itself.

Floor Plan: Select by size from the table above. These show the size of the floor along with the joins (if any) and direction of the floor joists. Please note the direction of the floor joists can change so must be checked before ordering if critical.

Assembly Guides: Select by size from the table above. Please note that due to the number of sizes, models and variations offered, the assembly guide may not be 100% specific to your building, but should provide you with all the necessary principles.

Eaves Height: Internal height at the lowest point of the roof (at the sides).

Lock: This building comes with a slide bolt suitable for fitting a padlock if desired.

Roof cover: Supplied with high quality polyester-based roofing felt.

Building Sizes All sizes are approximate, based on external measurements (unless stated otherwise) – they do not include roof overhang. Please allow for any overhangs when choosing the size of your building, bearing in mind space required for installation and maintenance. We advise you check internal sizes if buying a building for a specific purpose, or any other sizes if critical. Planning permission can be required on some buildings depending on size and location, please check with your local council if unsure.

Cladding & Framing

Cladding and framing make up the panels from which this building is constructed. In general, the thicker the cladding and framing, the stronger the shed will be and the longer it will last. All the panels on this building are made from sustainably sourced 12mm thick cladding and 45mm x 34mm thick framing. Please note this is the finished size after machining (some companies quote the size before machining).